PTFE Plastic Paste Extruder/ Medical Tube Extruder/ Soft Tube Extruder/ Multilumen Tube Machine
Plastic PTFE Paste Machine Features:
1, Adopt adjustable speed to accommodate pitch ,no need to change gear while operation;
2, High productive efficiency ; production rate is three times higher than present usual machine per hour ,the max production reach to 98m/hour;
3, Low noise ,transmission and pulling system adopt absorbing sound ,reducing shake and inserting equipment;
4, Easy maintenance ,transmission flexible, structure easy install and remove.
5, More friendly to environment: no PTFE powder splashing but powder output automatically
6, Intelligent control : producing gaskets by controlling the power quantity
7, More time saving : the power cut off automatically while the production number set up
8, Longer working life : no heat while working.
9, high quality components used.
Flow Chart
Paster Extrusion tube process:
PTFE Fine Powder raw material →Sifting →Mix with solvent→ Heating→ Performing billet → Extrusion→ Sintering → Finished Tube.
Matched machine: Machine screening, Mixing machine, Performing machine, Extruder machine, and Furnace heating, Mould.
The Low Noise Medical Tube Extrusion Machine is a specialized piece of equipment used in the medical industry for producing high-quality medical tubes with minimal noise levels. The application scenarios for this machine include:
Medical Device Manufacturing: The extrusion machine is used in the production of various medical tubes such as catheters, IV tubes, and respiratory tubes. The low noise levels ensure a quiet working environment, which is crucial in medical device manufacturing facilities.
Hospital Settings: Medical tubes produced by the extrusion machine are used in hospitals for various medical procedures and treatments. The low noise levels of the machine make it suitable for use in hospital settings where a quiet environment is necessary for patient comfort.
Research and Development: The extrusion machine can also be used in research and development laboratories for prototyping and testing new medical tube designs. The low noise levels allow researchers to work in a quiet environment conducive to focus and concentration.
Pharmaceutical Industry: Pharmaceutical companies may use the extrusion machine to produce specialized medical tubes for drug delivery systems. The low noise levels ensure a controlled production environment that meets strict quality standards.
Techincal Data:
| Paste Extruder |
Type & Technical Data |
| DX-D01 (suit for 25-60 lodaing cavity)OD:2mm-6mm |
PTFE Paste extrusion Hose Main machine : 30KW power 380V 50Hz one key start with hydraulic drive.1.2M high for material load cavity.WorkBlank machine : 3KW with 380V 50Hz Hydraulic drive PTFE blank high with 300-600mm.Furnace : 18KW 380V 50Hz with total high 8.5M 500 degree temperature. |
| DX-100(suitable for 60-120 loading cavity)OD:6MM-60MM -2 loading cavity |
FE Paste extrusion Hose Main machine : 30KW power 380V 40Hz one key start with hydraulic drive.1.5M high for material load cavity. WorkBlank machine : 3KW with 300V 50Hz Hydraulic drive PTFE blank high with 300-600mm. |
Product Tags:
|
|
Low Noise Medical Tube Extrusion Multi Lumen Extrusion Machine 0-20m/min Medical Tubing Extruder Images
|
